Description
PVC-Welt.de PVC-U adhesives and cleaners
THF free
The PVC-U adhesive from PVC-Welt.de is a quick-drying, THF-free adhesive for PVC-U pipes and fittings.
- Suitable for industrial applications with high requirements
- THF-free, no harmful effects from the solvent tetrahydrofuran
- Fast drying
- Temperature range from 0°C - 60°C
- Safe up to PN 16 bar when used correctly
- Processing instructions: Minimum ambient temperature: + 5°C
- PVC-U adhesive: for the 250ml, 500ml and 1,000ml versions, the brush is integrated in the lid
Hazard warning: PVC-Welt.de PVC-U adhesive and cleaner
Butanone - ethyl methyl ketone - cyclohexanone
Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Wear protective gloves/protective clothing/eye protection/face protection. In case of contact with skin (or hair): Remove all contaminated clothing immediately. Wash skin with water or shower. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. Dispose of the contents/container in accordance with the applicable waste disposal law (Act on the Reorganization of the Recycling and Waste Management Act of 24.02.2012)
Adhesive and cleaner consumption for 100 joints
Pipe A-ø
Adhesive kg
Cleaner kg
32mm
approx. 0.8
approx. 0.5
40 mm
approx. 1.1
approx. 0.7
50mm
approx. 1.5
approx. 0.9
63mm
approx. 1.7
approx. 1.1
75mm
approx. 2.2
approx. 1.3
90mm
approx. 3.0
approx. 1.4
110mm
approx. 4.0
approx. 1.7
125mm
approx. 5.0
approx. 2.0
160mm
approx. 6.0
approx. 2.5
200mm
approx. 7.0
approx. 3.0
The information provided should be seen as a maximum guide value. The actual consumption depends on conditions such as working technique, gap size and temperature, depending on the application.
Use of PVC-U cleaner
Release agents are used in the manufacture of fittings. These and other greasy environmental influences or residues are safely removed by PVC-U Cleaner. PVC-U Cleaner dissolves the surface structure of the PVC-U fitting to a certain extent, which leads to optimum adhesion of the PVC-U adhesive. PVC-U Cleaner is a solvent mixture and has an infinite shelf life. It evaporates if the container is not closed.
PVC-U Cleaner is a solvent and highly flammable!
Use of PVC-U adhesive
Gluing PVC-U pipe and fittings is actually the wrong term, as the process is cold welding. After final curing, the pipe, adhesive and socket form a firmly bonded unit and, if carried out correctly, the joint has the same quality characteristics as the rest of the PVC-U pipe system. Once the adhesive has cured, no chemical substances are released into the pipe system. The bonded joint can no longer be removed and can only be destroyed mechanically. PVC-U adhesive can be stored unopened in its original container for at least 24 months - theoretically indefinitely. However, as there is minimal oxygen exchange even in the unopened original container, the adhesive will thicken over time. This process is "accelerated" when the container is opened. Viscous adhesive that is no longer spreadable and can no longer be applied with a brush should no longer be used. Do not dilute with cleaner! Minimum ambient temperature for bonding work: + 5°C.
PVC-U adhesive contains a high proportion of highly flammable substances - ensure sufficient ventilation during the bonding process!
Provider identification:
HTC
Norisstraße 4
91257 Pegnitz
E-Mail: info@ht-connect.de
Safety Notice
Bitte beachten Sie die Warnhinweise!
- PVC-U Kleber und Reiniger sind leicht entzündlich!
- Tragen Sie Schutzhandschuhe und Schutzbrille!
- Sorgen Sie für ausreichend Frischluftzufuhr!
Media
There are currently no media files available.
